Aspen Electronics

  • Home
  • About
  • Service Department
  • Suppliers
    • Components
    • Test & Measurement
    • Catalogues - Aspen
    • Catalogues - Suppliers
  • Products
    • Product Groups
    • A-Z of Test Equipment
    • A-Z of Components
    • NQIT
  • NEWS
    • Aspen News
    • Press Releases
  • FAQ
  • Buy Online
    • APC Test
    • Keysight Technologies
  • Contact
  • Home
  • About
  • Service Department
  • Suppliers
    • Components
    • Test & Measurement
    • Catalogues - Aspen
    • Catalogues - Suppliers
  • Products
    • Product Groups
    • A-Z of Test Equipment
    • A-Z of Components
    • NQIT
  • NEWS
    • Aspen News
    • Press Releases
  • FAQ
  • Buy Online
    • APC Test
    • Keysight Technologies
  • Contact

New 250W Medical and ITE Certified External Power Supplies from TDK Lambda meet EU CoC Tier 2 Efficiency Standards...

3/4/2019

 
TDK Lambda announces the introduction of the DTM250-D external power supplies rated at 250W output power. Certified to both 60601-1 (medical) and 60950-1 (ITE) standards, the series also meets the latest EU CoC (Code of Conduct) Tier 2 and US DoE Level VI efficiency standards. Applications include B and BF rated medical products, test, measurement and portable communications equipment.

​The convection cooled DTM250-D is packaged in a rugged, vent-free, plastic enclosure measuring 45mm high, 90mm wide and 200mm length. As standard, the power supply is fitted with a Molex Mini Fit output connector with other types available upon request. The 90 - 264Vac input is applied via an IEC 320-C13 line cord.
Picture
Seven output voltages are available (12, 19, 24, 28, 36, 48 and 54V) and can operate in ambient temperatures from -20°C to +60°C with applicable derating below 0°C and above 40°C. Average efficiency is greater than 89% and off-load power consumption is less than 0.15W, measured in accordance with the EU and US efficiency regulations.

The units are safety certified to IEC/EN/UL 60950-1, IEC/EN/UL 60601-1 with CE marking for the Low Voltage, EMC and RoHS2 Directives. The DTM250-D also complies with IEC 60601-1-2 Edition 4:2014, EN 55011-B, EN 55032-B EMC and immunity standards. Operational altitude is 5,000m.

Click Here to download the full Product Datasheet.

Comments are closed.
© 2019 Aspen Electronics Ltd,
an APC Technology Group plc Company

​About Us  |  Privacy Policy  |  Contact Us