Aspen Electronics

  • Home
  • About
  • Service Department
  • Suppliers
    • Components
    • Test & Measurement
    • Catalogues - Aspen
    • Catalogues - Suppliers
  • Products
    • Product Groups
    • A-Z of Test Equipment
    • A-Z of Components
    • NQIT
  • NEWS
    • Aspen News
    • Press Releases
  • FAQ
  • Buy Online
    • APC Test
    • Keysight Technologies
  • Contact
  • Home
  • About
  • Service Department
  • Suppliers
    • Components
    • Test & Measurement
    • Catalogues - Aspen
    • Catalogues - Suppliers
  • Products
    • Product Groups
    • A-Z of Test Equipment
    • A-Z of Components
    • NQIT
  • NEWS
    • Aspen News
    • Press Releases
  • FAQ
  • Buy Online
    • APC Test
    • Keysight Technologies
  • Contact

KWS-A​ Series ~ Class II Encapsulated Power Supplies
​for High Ambient Temperatures


TDK Corporation announces the introduction of the KWS-A series of single output 5W to 25W encapsulated power supplies capable of operating in ambient temperatures of up to 85ºC.   With a Class II input, the products require no earth ground connection, making them suitable for use in a range of process control, broadcast, test & measurement and industrial equipment.
 
The board-mount product line-up comprises four power levels, 5W, 10W, 15W and 25W, and is housed in three compact package sizes.  The 5W and 10W units measure 38.1 x 25.4 x 21.5mm, the 15W 50.8 x 25.4 x 24mm and the 25W models 63.5 x 25.4 x 29mm.  Four popular output voltages are available, 5V, 12V, 15V and 24V, and all operate from a wide range input voltage of 85 – 265Vac, 47 - 440Hz.
Picture
The KWS-A can start up at -40ºC and operate without forced air cooling in ambient temperatures of up to 85ºC, and at full load over a -10ºC to +55ºC range (+45ºC for the 5V output 10W to 25W models).  Off-load power draw is less than 0.5W and full load efficiencies are as high as 88%.  Board design is made simpler and space minimised as no external fusing or electrolytic capacitors are required.
 
The series carries certification to UL/CSA/IEC/EN 60950-1 and the CE mark for the Low Voltage and RoHS2 Directives.  All models comply with EN 55011-A conducted and radiated emissions (class B with the addition of a small X-capacitor) and EN 61000-4-2, -6-2 immunity standards.
Features
  • Protection class II, no ground connection.
  • Small footprint without the need for external components.
  • Long electrolytic capacitor lifetime.
  • No load power consumption less than 0.5W.
  • Improved efficiencies up to 88%
  • Wide temp range -40ºC (start up) to + 85ºC.
Benefits
  • Easy, rapid on-board integration.
  • Saves space, time and cost.
  • Higher reliability, longer product or system life.
  • Better energy efficiency, better environmental footprint.
  • Reduced power losses, easier on board thermal management.
  • Enables use in a wide range of professional industrial applications.
Click Here to download the full product datasheet.
Picture
© 2019 Aspen Electronics Ltd,
an APC Technology Group plc Company

​About Us  |  Privacy Policy  |  Contact Us